About CCS&ES

Systems

Services

Resource

Products
images

Archives


Industrial controls create largest Environmental Benefits

Biggest gains in air quality and energy savings seen in passive technologies.

With the rise of passive energy technologies, companies formerly using huge amounts of energy and barely controlling emissions are quickly becoming the major players in efficiency and environmental responsibility. While upfront costs may appear daunting, several manufacturers have come to see the huge potential for investment in energy recovery technology. Through the use of energy recovery and regenerative energy sources, industrial concerns are able to save money, cut energy use and through scale offer the greatest positive impact to the environment.  Read more...

Expert regenerative thermal oxidizer technicians protects investment

Oxidizer equipment repair preserves efficiency, safety

Operators looking to maintain the efficiency and safety of thermal oxidizing equipment for pollution control are best served finding a trusted service partner. Emission control engineers and regenerative thermal oxidizer technicians have specific experience in managing the service and repair of oxidizer equipment. Finding and fixing points of stress, these professionals preserve the operational efficiency for industrial enterprises destroying volatile organic compounds (VOCs) through the use of regenerative thermal oxidation. Operators can rely on the maintenance plans developed by regenerative thermal oxidizer technicians to keep plants running safely, productively and profitably.  Read more...

Regenerative thermal oxidizer products save expense with efficiency

Heat recovery saves fuel and expense while boosting pollution controls

Saving costs while ramping up efficiency is the goal of any project integrating regenerative thermal oxidizer products into air pollution controls. With designs able to capture up to 96 percent of operational heat, regenerative oxidizers are among the most economical, efficient means of destroying volatile organic compounds (VOCs) in air pollutant emissions. By saving supplementary fuel, these emissions control devices aid the environment while scrubbing out hazardous air pollutants (HAPs) from industrial exhaust.  Read more...

Regenerative thermal oxidizer equipment maximizes pollution controls

Operators save fuel, expense and time with regenerative pollution controls

Air pollution controls were not invented with the introduction of regenerative thermal oxidizer equipment, but these precision devices revolutionized the efficiency and cost impact of keeping industrial emissions free of hazardous air pollutants. Regenerative thermal oxidizers came into vogue with operators looking to conserve heat energy expended through direct combustion of volatile organic compounds (VOCs). This early pollution control process, introduced following the Clean Air Act Amendments of 1970, used vast amounts of supplemental fuel, costing a great deal and adding undo energy consumption to the pollution control process. Regenerative thermal oxidizer equipment improved energy efficiency so radically that in some cases it curtailed the use of supplemental fuel all together.  Read more...

Regenerative thermal oxidizer maintenance keeps operators in compliance

Scheduled service plans also save money and time.

Solid planning and habitual monitoring are key strategies to saving huge costs on regenerative thermal oxidizer maintenance. Thermal oxidizing equipment relies on precision monitoring and valve equipment to insure complete efficiency; along with well-maintained stoneware beds to retain heat energy. Finding a technical partner to guide you through the creation of a routine maintenance schedule will save time and money by early avoidance of costly repairs and outages. Managing regenerative thermal oxidizer maintenance side steps emergency measures, keeping operators in compliance and worry-free.  Read more...

Used regenerative thermal oxidizer equipment lowers costs

Reliable pollution controls are available at a discount with the right provider

Not every operator can make a large upfront capital expense in new equipment, but still want the long-term cost savings of regenerative technology for their industrial air pollution controls. Thankfully, with the guidance of expert engineers and technicians, it is possible to purchase used regenerative thermal oxidizer units with the same reliability, efficiency and cost savings as a new or custom installation. By partnering with a firm deep in experience with regenerative thermal oxidizers, operators can extract the benefit without the worry of purchasing substandard or overworked devices. It’s a win-win situation for every party involved.  Read more...

Roto Concentrators

Purified air concentrators with rotary technology reduce costs

Rotor concentrators employ rotary technology in combination with thermal and catalytic oxidizers to reduce physical size, energy use and recurring costs. For operators with high volumes of exhaust flow with low concentrations of volatile organic compounds (VOCs), these purified air concentrators can significantly reduce operating expenses while making more efficient use of valuable space in the plant environment.  Read more...

Selective Catalytic Reduction Systems

The industry standard for NOx control technology

Control of toxic nitrogen oxides (NOx) calls for selective catalytic reduction systems (SCR). This air pollution control technology blends the exhaust waste streams with a reagent chemical – anhydrous ammonia, aqueous ammonia or urea – before passing the combination over a catalyst bed. Total NOx reduction takes place in the SCR systems through the resulting chemical reaction, transforming the previously hazardous air pollutants into harmless water and nitrogen.

This reduction chemistry is at the heart of selective catalytic reduction systems NOx control for particulate emission. Using either anhydrous ammonia or aqueous ammonia as the reagent chemical, the process can be expressed through the following equations:  Read more...

Gas Flares

Gas Flares

Custom designed for high quality

Gas flares custom designed and manufactured by Combustion Controls Solutions and Environmental Services offer high-quality and efficient pollution controls for emissions from landfills. Waste gas from landfills – including methane and other HAPs – can be safely and efficiently abated using our custom designed gas flares.

Each of the over 1,000 waste gas flares we installed met or exceeded regulatory standards for ultra-high destruction efficiency. Furthermore, CCS&ES waste gas flares for landfills automatically monitor and respond to the ever-changing composition and flow rates inherent to the chaotic operating environment of a landfill.  Read more...

Used Thermal Oxidizer

A certified pre-owned thermal oxidizer system save capital expense

The purchase of a used thermal oxidizer gives operators looking to expand their air pollution controls a great option for long-term value and cost savings. By lowering the upfront capital expense, ownership and plant managers can account for the investment in these thermal oxidizer products and their lower operating costs, even during harsh economic conditions. However, navigating the specifics of the secondary market for a used thermal oxidizer can prove challenging to even the most technically educated operator.  Read more...